Tac-Stick Current Detection Probe
Day or night, TAC Stick helps keep you safe on the front line. Simple to use, this lightweight, hand-held AC current-sensing device can be used in natural disaster situations, transportation accidents, and other emergency rescue operations.
The TAC™ Stick consists of a high sensitivity AC 50/60Hz amplifier. The special logarithmic amplifier is capable of receiving AC signals over a very wide amplitude range. Such signals, emanating from unshielded, voltage-carrying surface, can be made audible and visible as a warning. The warning signals (beeps and LED flashes) will increase as the signal amplitude increases. This makes it possible to locate
the source of the signal quickly.
Specifications
 |  |
| Signal Indication | Audible (beep) and visual (LED). |
| Frequency Range | AC voltages 50/60Hz |
| Self Test | Built-in, 3 second self-test after turn on. |
| Insulation | PVC plastic housing |
| Note | Direct contact with tension wires should be avoided. |
| Batteries | 4x AA alkaline batteries |
| Battery Life | Continuous use, 300 hours Typical intermittent use, 1 year |
| Battery Check | Built in low voltage warning |
| Battery Change | Requires removal of lanyard |
| Water Resistance | Splashwater-proof |
| Temperature Range | Operating:-30 to +50 C (-22 to +122 F) |
| Storage and transport | -40 to +70 C (-40 to +158 F) |
| Size | 45mm (1 ¾”) diameterx 521 mm (20 ½”) long |
| Weight, including batteries | 570 grams (1lb. 4oz.) |
| Shipping Weight | 820 grams (1.8 lbs.) |